How to Connect Linksys WiFi Extender to New Router?

Linksys WiFi Extender

Have you just decoupled your Linksys extender from the existing router and decided to connect it to a new one? Well, you might have done this due to several reasons. But, regardless of the reason, are you aware of the process of connecting your Linksys device to a new router? It looks like you don’t. Worry not! The points to connect the Linksys WiFi extender to new router have been charted in this write-up. However, before that, you have to go through the process of resetting the Linksys extender. The next section will let you know why and how.

Before Connecting Linksys Extender to New Router

You need to reset your Linksys device because it is still running on wireless settings specified to it concerning the previous router. In that scenario, the connection between the new router and your Linksys range extender may fail as the extender will still try to amplify the wireless frequencies of the existing router. Resetting the extender will help you erase every customized setting assigned to the extender including the Linksys extender setup xxx.

To reset your range extender or delete the settings assigned to it with the existing router’s settings, find and press the Reset button on the device. Wait for a few moments before releasing the button. You will soon notice that the extender has now started flaunting those settings on which it was running at the time of purchase.

Now, your Linksys extender is all set to get connected to your new router. The steps highlighted in the next section will make you learn how.

Steps to Connect Linksys Extender to New Router

This is to inform you that you need to establish a wired connection between your devices at the initial stage. Once you get access to the extender’s dashboard, it can be commanded to extend the network range of the new router with the aid of a wireless source. Given below are the steps that will help you learn all the steps of connecting your devices properly:

  • Get your hands on an Ethernet cable and use it to create a wired connection between the extender and the new router. For this, firstly bring both devices close to each other and connect the LAN port of the Linksys extender to the WAN port of the router. The connection must be secure.

  • Now, gain access to a computer and load an internet browser that is easy to operate. Locate the address bar thereafter and type the extender’s default web address there. Press Enter to move a step closer to establishing a successful connection between devices.

  • You’ll now get redirected to the login portal of the Linksys wireless device. Here, input the default password and username of your extender by referring to the quick installation guide. Know that the customized credentials of the extender won’t be of any help now. You have to change them once again after connecting your WiFi devices.

  • After entering the password of the extender, select Login and you will be prompted to select the network you wish to extend. Now, click the network name of your new router and enter its network key. This way a wireless connection between your WiFi devices will get established. Thereafter, follow the on-screen instructions.

As soon as your devices get connected wirelessly, the extender will be all set to amplify the wireless signals emitted by the new router.

Cannot Connect Linksys Extender to New Router?

There is a possibility that you might fail to connect your Linksys range extender to a new router by accessing In that case, you are suggested to make use of the Linksys application. If you still don’t get success, follow these tips:

  • Make sure that you are entering the correct network key of your newly purchased router. Know that WiFi passwords are case-sensitive where not even a single typing mistake is allowed. Additionally, avoid selecting the incorrect network to extend.

  • The distance between your new router and the Linksys range extender must be optimal. If it is more or less than the suggested value, then also you can face problems while connecting your devices. For more info about this distance, check out the user manual.

Summing Up

When the user learns how to connect Linksys extender to the new router, extending the network range becomes easy. Here, you got to know that performing a Linksys extender reset is important to get the extender configured with the new router. You also learned the correct instructions to connect both devices wirelessly. Once you do so, you are free to disconnect the Ethernet cable joining them and locate the extender in the central area of the house so that every WiFi-dead zone can be filled with a high-speed internet connection.

Making A Lasting Impression With Lyfesnz Previous post Making A Lasting Impression With Lyfesnz
Next post How to Teach Letter writing for University in the UK

Leave a Reply

Your email address will not be published. Required fields are marked *