10 Strategies for Extending Your Wireless Router's Range

Read Time:4 Minute, 16 Second

Have you had any problems with your wireless network? If that’s the case, you’re not alone.

It’s possible for many wireless networks to lag or briefly fail. This poor performance reduces your productivity. Although there isn’t a foolproof method for fixing wireless network issues, the following tips and tricks might make your network more functional.

You’re probably trying to figure out how the wifi router configuration process works right now, but don’t worry—all of your questions will be answered here.

If you believe your Wi-Fi has gotten sluggish, you may test your internet speed using a number of tools. You might try a few more techniques as well to fix your network issues.
All of us can configure routers; all we need to do is follow the instructions and try our best.

1.First, examine your internet connection

Before blaming the Wi-Fi and technology, make sure the internet entering your home is operating as it should. This can be done by connecting your PC and router directly using an Ethernet connection. If your laptop doesn’t have an Ethernet port, you’ll need a USB-to-Ethernet converter.

Central locations in your building will provide the best signal reception overall. Put your router or access point high up on a shelf if it’s on the first floor of a two-story building so that devices on the second floor will receive a greater signal.

2.Firmware Update

Before you start tinkering, it’s a good idea to upgrade your router’s firmware. To increase speed a little bit, router software is always being enhanced. The manufacturer and type of your device will affect how easy—or challenging—it is to replace your software.

Because the firmware update procedure is frequently already included into the administration interface of contemporary routers, it simply only a few clicks to make the change. On certain models, particularly older ones, updating the firmware still requires visiting the manufacturer’s website, downloading the file from your router’s support page, and uploading it via the administrator interface. Even though it takes time, taking this action is still wise because there is a very simple remedy.

3.Upgrade your device’s wireless card-based network adapter.

Your computer communicates with other devices over a wireless network. Devices with wireless networking capabilities often have excellent antennas. Even if the router can broadcast to your device, there are times when it is unable to respond with signals. To solve this issue, swap your card-based wireless network adapter for a USB wireless network adapter that makes use of an external antenna.

4.Use a wireless repeater

Wireless repeaters are useful devices that amplify a wireless signal from your network and rebroadcast it to additional floors or the other side of a building. If there is an outlet, you can install one, but try to position it halfway between your device and your network, modem, or access point. Do some research before buying one of these products. Certain wireless repeaters could be difficult to set up and have a detrimental effect on your network’s performance.

5.Change the wireless channel

There are numerous channels available for wireless routers to transmit on. If you have interference, try changing the wireless router’s channel using the settings page. Open your web browser and type the IP address into the address box to generally access this page. The configuration of your device doesn’t need to be changed because it will automatically detect the new channel.

6.Verify Frequency

Examine your network’s administrator interface to make sure it is configured to function optimally. Going to the 5GHz frequency rather than the more popular 2.4GHz channel will probably result in a higher speed if your network has two bands.

7.Say Good-Bye to Intruders

It’s possible that the problem has nothing to do with interference or Wi-Fi range. If your network is public or has a weak password, you face the danger of having a few unwelcome users access it. If your neighbor is downloading a lot of 4K movies over your Wi-Fi, it will affect your video conversations.

8.QA period

Most modern routers have Quality of Service (QoS) features to regulate how much bandwidth applications use, like the Netgear menu(Opens in a new window) above. QoS settings are often found in the advanced settings section of the network administrator interface.

9.Repositioning the Antenna

If your router only has an internal antenna, it would be a good idea to add an external antenna because the internal antenna often delivers a better signal. A lot of router producers provide antennas for sale separately. Antennas that you can attach to your router yourself may have been included, but if not, you can buy them separately.

10.Employ a range-extender

If none of the aforementioned solutions work, your home probably is too big for a single router to reliably transmit a signal throughout. The number of walls and corners might be too much for your router to pass through. If so, the best solution for extending your signal would be a mesh network or range extender.