Netgear N300 WiFi range extender has grabbed many eyeballs for ages. The device is known for extending the existing router range to every nook and cranny of your house without letting you worry about WiFi signals dropping. It has been approved, not by netizens but by every user worldwide. If you have also configured your WiFi range extender in your home using www mywifiext net n300 setup instructions, then you must pat yourself on your back for making such an incredible decision. After setting up your Netgear WiFi range extender, here’s to hope that all the WiFi dead zones are removed from your house. If so, then it would be a great review for all Netgear extender users.
But, do you know, what the LEDs on your Netgear WiFi range extender indicate? Is your answer a big no? Why worry? Just stick to this 7-minute read! Over here, you will learn what the LEDs on your N300 device signify. Hence, keep reading!
Netgear N300 Extender LEDs: Explained
If you see blinking red, amber, or green color LEDs on your Netgear extender as “Christmas Lights”, then you are living with the wrong thought. The LEDs on your N300 device indicate a different meaning. What happened? Aren’t you aware of the Netgear extender LEDs’ meanings? Don’t worry! In this post, we will make you familiar with the LEDs on your Netgear N300 extender. Read on!
Netgear N3000 Extender LEDs
Power LED
The first light on your Netgear N300 extender is the power light. The purpose of the extender’s power LED is to tell you about the power being supplied to it.
If the N300 power LED is solid green, then it means that the extender is powered on in a proper way and there are no fluctuations in it.
And, if the power LED on your Netgear N300 extender is solid amber, it conveys a message that the device (N300) is booting up.
If it is off, its crystal-clear that your extender is not powered on in a proper way, right? In such a case, ensure that:
-
Your Netgear extender is powered up
-
It is plugged into a damage-free wall outlet
-
There are no ups and downs (fluctuations) in the electricity
WPS LED
The second LED on your Netgear N300 WiFi range extender is the WPS LED. It conveys the following message:
-
If the WPS LED is solid green on your Netgear N300 WiFi range extender, it means WPA or WPA2 (WiFi security) is enabled on it.
-
On the other hand, if the N300’s WPS LED is blinking green, it indicates that a WPS connection is established between your extender, existing router, PC, or laptop.
-
And, if the Netgear extender’s WPS LED is off, it clearly indicates that no security is enabled on it.
Router Link LED
This LED doesn’t need any introduction, does it? It can be found easily on any model of Netgear extender.
If the router Link LED on your Netgear N300 extender is solid green, it means that your device (N300 extender) has a very good connection with your existing router and you are all set to perform Netgear extender setup (if not configured) and update its firmware.
On the other hand, if the N300’s Router Link LED is solid amber, it means that the extender-router connection is fair.
If the LED shows solid red color, then you have to place your Netgear extender within reach of your host router. Distance between the devices is a sign of red color.
Just in case, you see Router Link LED off, it means there is no connection between your N300 and your existing device.
Thus, for fixing the issue, pull your devices closer and make an optimal connection between them.
Device Link LED
There are three colours that you can see on Device Link LED on your Netgear N300 extender: green, amber, and red.
Green indicates, a device (which you have chosen) is connected to your Netgear N300 extender in a successful manner.
Amber color indicates your range extender has a good connection with a particular device.
Red color indicates, the device you have used to access the Netgear N300 extender is not placed in close proximity.
And, if the LED is off, it indicates – no device is accessing the extender’s SSID.
For fixing the issue, just ensure that your device (which you are using to access the extender’s SSID) is within reach of N300.
Our detailed guide on Netgear N300 extender lights comes to an end. Anticipating that you are now familiar with the various LEDs on your Netgear WiFi range extender with the actual meaning of what they indicate. We really hope that you are not confused about the status of your N300 LEDs.